Hybrid Inverter System

Generator Stop/Start

The new stop/start system is fully automated with the inverters built in signal relay. The inverter can start the generator or APU under many different conditions. It can start the generator when the storage battery bank is getting low, the tempera­ture is low, or if the inverter needs more power to run a load.

4 Stage Charging

Unique four stage battery charge system ensures full charge cycle for any type or size of battery con­figuration. MultiPlus identifies the remaining energy in the battery of each cycle.The adapted charge pro­cess then delivers the right amount each time. A properly charged battery will last much longer and provide you with more useable energy.

Uninterrupted Power

Switching from generator to inverter power and back is automatic under the UPS function so connected tools and equipment are unaffected and can keep in steady operationas needed.

Power Assist

If the onboard load on the vehicle exceeds the power that the genera­tor APU or shore-power can produce, then the inverter function works in parallel with the other power source to boost the total energy available which will avoid circuit overload and allow the load to run.

Power Control

While shore power may be available at a limited amperage, the optional remote control panel will notify the user of the current limitation. The system will control the output to work with the power limitations. As the power is increased for the onboard load, the charger output automatically reduces to avoid an overload on the system.

Parallel Connection

If one inverter is not enough, mul­tiple inverters can be connected in parallel to create a power solution for your task.

Typical Setup